Jarvis, Inc.

Ryan Bonnalie

2024-01

My Jarvis threaded barrel arrived today, for my Staccato P 4.4". I shot it suppressed with my Omega 9K; it performed flawlessly in -5° weather. The DLC is awesome! I can't recommend Jarvis enuff. It feels like it's tuned for my pistol! A+!

PatrickJesseWhite

2019-05

Bought a custom threaded barrel for my USP Expert. The barrel is extremely high quality, and quite similar to the factory one. It functioned great and was quite accurate. Would definitely buy from them again.

RICK MCQUISTON

2019-05

Precision work on this 9mm Beretta barrel. Production 1997 92sb.I could not have found a better company to deal with and shooting groups of 1 inch @ 10yrds. Their attention to detail is top notch and there customer service is hard to find these days. Will reach out for all my needs in the future. Keep up the outstanding work guys.Thanks

Tim Jeffreys

2019-05

I purchased a drop-in barrel from Jarvis ,it was just as accurate as the factory barrel but i was looking for a more accurate barrel. I contacted Jarvis and he insisted that he would make me a very accurate barrel, so he told me to ship my slide to him and he would make me a fitted barrel for free ,he wanted me to be satisfied. I was very impressed with such customer service. They went out of their way to make me happy with the purchase.Would definitely buy again. And yes the new fitted barrel was extremely accurate, it averaged 1 1/2 in groups at 25yds .

Jeff painter

2019-05

They were extremely helpful! I had purchased a HK USP45 with a threaded barrel that the original owner had purchased from Jarvis. The thread protector was missing and he did not know the thread pitch. I contacted Jarvis and they went above and beyond to determine the thread pitch and ship a new thread protector to me. Great service.

Bravo Two Zero

2019-05

I ordered two competition barrels for my Walther PPQ Q5 Match and they both dropped in flawlessly. I added a two port compensator and have been running one all this year for 3gun. After a few thousand rounds, it functions just like new. Delivery from Jarvis was quick and they helped me with all the export requirements.

Patrick N

2019-05

I have had 3 barrels made for H&K pistols from Jarvis. Even though I am on the other side of the United States the communication , shipping and product delivered have been excellent. I would not hesitate to use again or recommend to someone who needs a barrel.

paul dunn

2019-05

you can read about a company but that does not give you a true idea of the end results. Here is my end results. the drop in barrel that I bought fits better in my Kimber than the factory barrel ever did. It is tight cycles like never before. The first round chambered went in as smooth as silk.Customer service. I called today talked to a human without going around in circles. Very helpful very informative. Could not ask for anything more from a company. if you need a barrel look no further than Jarvis.

Why Not

2019-05

I ordered a .40 S&W to 9mm conversion barrel for my Walther P99, and it works flawlessly. The coating is slicker than the coating on my factory barrel, and it seems more accurate. My only regret is that I did not have the barrel fitted to my slide.

Russell Major

2019-05

Ordered the barrel and compensator kit for my M9A3. Extremely pleased with it. Very helpful, had really solid info exchange and a good turn around time. Took it to the range after I got it back and it feels more like a 22lr now; the compensator does its job very well. It's a ton of fun to shoot and their barrel is more accurate than I am. If I find myself quiring more Berettas, I'm coming back to Jarvis Inc for more work.* after putting several hundred rounds through it, I can honestly say that this barrel kit can outshoot me. I've had zero issues from it, it's easier to maintain than I thought it might be and the coating is holding up well. I trust it enough to not only be a good range piece, but it's also my nightstand gun now. Excellent job guys!

Brian R

2019-05

Purchased a drop in threaded barrel from Jarvis for a Valor and they under promised and over delivered! Match grade stainless barrel is very accurate and I would not hesitate to purchase from Jarvis again...nor should you!

Ryan Mott

2019-05

Ordered a barrel for a 9mm PPQ. Realizing custom orders take a while, I wasn't surprised by the wait for my order. Great product. I have around 800 rounds through it within the last couple months. No issues at all

Mike Sakich

2019-05

Purchased the 9mm conversion for my 40 SW PPQM1. The barrel had a clean, even finish and arrived promptly.The straight "drop in" worked perfectly, as did the 9mm magazines. Point of aim had minimal change and the groups were tight and repeatable. The pistol has been completed disassembled, cleaned and reassembled 2X with no worrisome wear or change in point of aim (approx 400 rds). I always loved the PPQM1, but had grown tired of the 40SW and wished it had been purchased in 9mm. Now I love it again and at a fraction of the cost.

Gentry Tipton

2019-05

Good Lord!! I stuck your 9mm conversion barrel in my .40 S&W P99AS with a DPM buffer system and my pet load of a 147 grain HCL FP with 7 grains of Accurate #7 went from an average but impressive 1,175fps to an astonishing 1,340+fps!!!! That's with no pressure signs. Thank you Jarvis!

Frank Hainze

2019-05

Service was exceptionally professional and prompt. Product is top quality. If you are in the market for upgrading your barrel, Jarvis is a source you can depend upon.

Jim Mednansky

2018-05

The barrel they made for my Glock 20is great.fit perfectly. Performance at the range is great to. Tight groups out to 50 yards. Big improvement over factory barrel.

Andrew H

2019-05

Great shipping time ! Ordered a barrel with thread for my pow 45 . High quality and shoots extremely accurate. Love my Jarvis barrel!

Andrei Rodriguez

2019-05

They delivered the correct item (recoil spring for my FN5.7) and when I expedited it, the item arrived on time. It was delivered on good packaging properly labeled and identified.

Imran arif

2021-05

I’m very pleased with Jarvis, incbought beretta 92fs compensatorFrom themI send my gun barrel for threading toFor fitGot it back I weekGreat job guysMy gun look awesome with compensatorThank you 🙏

Neil Stewart

2019-05

Very nice quality barrel. Fit and finish are excellent and the estimated time to deliver very was accurate. Great company to do business with.

Leopold Gering

2024-01

Outstanding products and customer service!

Larcen Xavier

2019-05

Quick order processing time and great quality of end-product. I would do business with Jarvis again.

EndTheFedAntiGlblst

2019-05

Awesome threaded barrels. I’ve put about 2,000 rounds through my Jarvis barrel with no issues.

D. Kurt

2019-05

All around solid client service experience. Need more time to test product, but predict no issues.

Benjamin W

2022-05

Incredible craftsmanship and slide work and an excellent turn around time. Highly recommend!!

Aaron Jacobs

2019-05

They get you their product fast. No problems at all.

Daniel Wall

2023-05

Bill and Andrew really know their stuff. Thank you

Sergio Ibarra

2019-05

Fast, easy, fantastic quality. What more could you ask for?

Jim Zemansky

2019-05

Fantastic barrel. Definitely and A+ rating.

Rick Staples

2019-05

Great company to work with, very high quality